Are you looking forward to knowing how to set up D-Link WBR-2310 wireless router and how it can be used to create a secure home network for all wireless and wired devices.
Before you go ahead and start using the D-Link WBR-2310 router, you must first configure wireless settings and the internet.
Step 1: First of all, you need to click on the setup wizard button which appears when you log in for the very first time. This will help you configure your network and keep it secure. If you don't see this button, then go to the setup tab.
Step 2: Select the button to launch the internet connection setup wizard. This will initiate the setup procedure for your administrator account and router's network connection. Select Next to Continue when asked.
Step 3: After that, you need to create an administrator password. Either memorize it or note it down somewhere. After that, you need to reset your router if you forget the password.
Step 4: Select the right time zone by going to the drop-down menu.
Step 5: After that, select the connection type. Usually, the first choice is a DHCP connection. In case you are not sure, then get in touch with your internet service provider. Get in touch with your internet service provider if you are not sure.
Step 6: Select the option of cloning your IP address if it is blank. generally, this section is filed. You should only select this option if the MAC address field is blank.
Step 7: Now, save the settings by clicking on the Connect button. After that, your router will restart.
Step 1: Enter the IP address 192.168.0.1 in the location bar of your browser. Type the password that you created in the section earlier. Now, enter the username "Admin".
Step 2: Go to the setup tab and then open the setup wizards.
Step 3: Go to the wireless settings menu in the left frame. Now, a new page will open up that will allow you to set up your Wi-Fi network.
Step 4: Go to the "Enable wireless box" and then check it. This will enable your wireless network once you save the settings.
Step 5: Enter the name of your network and then choose WPA2 security mode.
Step 6: After that, you need to create a strong password that is very difficult to crack.
Step 7: Click on the save button in order to save the settings.
Suraj Singh
Last Update: 05 Jan 2024
Copyright © 2024 Dlink Routers Support | all right reserved.
DISCLAIMER : Dlink Routers Support is an independent Technical Support Provider. We are not affiliated to any 3rd party brand unless specified. Call vendor for direct Support.
Popular Post